Micorox® Epoxy Grout
For Machinery Mounting and Anchoring

Description
Micorox grouts are fast setting 100% solids epoxy systems which yield exceptionally high strength and need minimal surface preparation. That means installation is quick and trouble free, virtually eliminating costly machine down time. Material, equipment and labor costs are greatly reduced too! In most cases machines can be reset without removal-just raise and level the machine and regrout it. Anchoring bolts is a quick and efficient job with Micorox; just drill a hole slightly larger than the bolt and pour in the Micorox grout to anchor as desired. Normally, operation can be resumed within 6 hours.

Standard Grout
Micorox Standard Grout is an exceptionally high strength, fast setting epoxy material designed for grouting, regrouting and anchoring equipment. The product is a two-component, 100% solids epoxy with superior flow rates for easy penetration under machine bases or sole plates. The grout resists vibration and impact and has compressive strengths up to 16,800 psi. This outstanding material may also be used to construct level bases without transits or other leveling equipment, and is ideal for anchoring bolts. Use Standard Grout when clearance is 1/2 to 1 inch.

X-tra Fluid Grout L/O
Combines Superior Flow rates, High Physical Strengths and Color Matching capabilities with LOW ODER to provide a low Viscosity grout for use in healthcare or commercial environments where safety, appearance and performance are important.

Deepour® Grout
Deepour Grout is a three component, 100% solids epoxy system used in grouting heavy machinery and other equipment to thicknesses of 12 inches. Deepour is far superior to cement grouts. It provides resistance to high impact, vibration, torque loads and other stresses and offers corrosion resistance to water, oil, solvents and a wide variety of other chemicals. Deepour Grout substantially reduces long term grouting costs since it is not subject to the failures associated with cement and iron-filled cement grouts. Deepour Grout offers cured strengths of 13,820 psi to 17,000 psi.